The irw program doesn't interact with your .lircrc file at all. It just displays the name of the button as defined in /etc/lircd.conf.
Are you running mythfrontend as root? If not, then that's likely why things aren't working. I notice that you're looking at the file in /root/.mythtv, but if you're running mythtv as user "mythtv", which most people do, then it won't work. -- Joe --- Dave <[EMAIL PROTECTED]> wrote: > I've got an almost identical setup here (except Myth > 18.1) and I'm > having the exact same problem. irw works just fine, > but Myth won't > respond. > > A few things I've noticed > 1. lircd log shows no connection made when myth > starts. When I start > irw, I see: > lircd 0.7.0[7458]: accepted new client on /dev/lircd > > 2. I've recompiled myth a few times to ensure lirc > support is enabled: > # Input Support > Joystick menu yes > lirc support yes > ivtv support yes > > 3. I'm pretty sure I have the lircrc file setup > correctly, here's an example: > more /root/.mythtv/lircrc > begin > prog = mythtv > button = UP > # This is the "up" on the central diamond > repeat = 3 > config = Up > end > > irw shows this when I press the up botton: > 0000000000001794 00 UP grayHauppauge > > So I assume IRW's UP maps to button=UP, which is the > same way my > working box is configured > > Any thoughts or suggestions are greatly appreciated > Dave > _______________________________________________ > mythtv-users mailing list > [EMAIL PROTECTED] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ mythtv-users mailing list [EMAIL PROTECTED] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
