Date: 29 Aug 2005 05:56:16 -0700 From: Jim Reith <[EMAIL PROTECTED]> Subject: Re: [mythtv-users] KnoppMyth and Hauppauge 350 To: Discussion about mythtv <[email protected]> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="us-ascii"; format=flowed
At 08:40 AM 8/29/2005, you wrote: >Hello, this is my first post so please bear with me. >I have a P3 933 mhz, the PVR-350 with grey remote, and an old Nvidia TNT2 >in the AGP slot. >MythTV comes up and I escape out to the command line. >I type >lircd start > >and then I try to run >irw >when I hit buttons on the remote nothing happens. >The IR receiver is plugged in through what looks like a headphone >connector on the back of the PVR-350, I plugged it in there since it fit >and came with the card. >There are no LED's on the remote. I am not sure if the remote is at fault, >the receiver or my configuration. > >MY pvr-350 only has the remote plugged in right now as I have not figured >out how I am going to connect this thing to the TV yet. >Is there a cable that connects the sound card to the PVR-350? the only >cables I found were a IR receiver, FM radio antenna, the big cable mess, >and a little adapter piece. I have an onboard i8x0 sound with three plugs. > >thank you for your time and have a good day http://knoppmythwiki.org/index.php?page=HauppaugeThreeFiftyInstallation Check out the section on lircrc in http://knoppmythwiki.org/index.php?page=LIRCHowTo to set up your remote You need to determine if you have the silver or grey remote to set up the buttons properly. thank you very much, I appreciate your help. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
