On Sat, 1983-09-03 at 18:42 -0500, R. Geoffrey Newbury wrote: > On Sat, 3 Sep 2005 21:59:49 +0200, Dirk Aust wrote: > > >Hi all, > >I have a VIA EPIA M10000 with a CLE266 using the HW MPEG2 decoder with the > >XvMCvld extension, with the old 2.6.8.1 it works, but when I use the brand > >new 2.6.13 kernel only the top half of the screen is used when loading the > >mythfrontend, even using the drm.ko and via.ko from UNICHROME project, it's > >the same, I get no error messages in the Xorg.log or in > >the /var/log/messages. And furthermore when I starting a simple xdm screen > >it > >also works. > > > >Anybody made the same expieriences? > > Of sorts....Try this. Set up so your xserver does NOT start up at boot. > This will give you a runlevel 6 session with no display manager (ie, you > will see a black tty1 login prompt. > > Login, then, run startx. > > The xserver will load and you will be left at your messed up screen. Use > CRTL-ALT-F1 to switch back to tty1. > You will see the messages put out by/from xorg.conf as it starts up..
Or you could inspect /var/log/Xorg.log.0 > I suspect you may see what I have been getting: invalid module format... That usually means that the module was built with a vastly different version of gcc than the application trying to insert it. Austin
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
