On Thursday 08 September 2005 19:03, Steve wrote: > I think you got it there... I think I have Tuner1 set for /dev/video1.
Don't do that. Set both /dev/video0 and /dev/video1 to their respective Tuner 0 entries in mythtv-setup. > So I > have should have 2 Tuner 0's and each should be /dev/tuner0 and > /dev/tuner1. Er, not exactly, see above. > I think thats what you're trying to say. I'm not sure how to > see if IVTV is getting both cards but I think "dmesg | grep IVTV" should do > it and I see: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) > > : chip found @ 0xc0 (ivtv i2c driver #0) > > ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] > > : chip found @ 0xc2 (ivtv i2c driver #0) > > ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] > ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] > ivtv: i2c attach to card #0 ok [client=tveeprom, addr=50] > ivtv: This is the first unit of a PVR500 > So there's the first card. > ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) > > : chip found @ 0xc2 (ivtv i2c driver #1) > > ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] > ivtv: i2c attach to card #1 ok [client=tda9887, addr=43] > ivtv: i2c attach to card #1 ok [client=tveeprom, addr=50] > ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44] > ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] > ivtv: This is the second unit of a PVR500 > And here's tuner 2 (although its the same card.) That all looks fine, both encoders/tuners are being detected and configured. > I just have one more question. Even though there is only one coaxial cable > coming into the card because theres only 1 cable input, I still can have 2 > streams there, right? Or do I somehow need another cable input? There is an internal splitter. Just one cable input feeds both tuners on the card. -- Jarod Wilson [EMAIL PROTECTED]
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
