On 9/8/05, Sérgio Gomes <[EMAIL PROTECTED]> wrote: > Hello everyone! > > I have finally found the problem! > > I did a little experience: I enabled the AC97 soundcard in my > motherboard and connected the output of the TV card to it instead of to > the Audigy. No more crackling! However, I noticed the volume is way too > high! The TV card seems to be outputting sound at a very high level. The > Audigy tolerated this, but not my AC97 card. Not very serious though, > I'm getting an attenuator to solve the problem. > > The high levels were however not the problem, since the crackling only > happened in MythTV and not when I recorded TV sound in other programs. > > > So, the crackling I experienced is probably MythTV not liking my > soundcard (Audigy 2, emu10k1 kernel module), since in all other > programs, and all the playback and recording experiments I did there was > never a crackle or pop. The emu10k1 factor is also consistent with > Michael Cowell's setup, who posted his similar problems. It must be > something in the emu10k1 driver that MythTV doesn't like. > > So, what I can say is, if you have a TV card with a dongle cable to > connect to a line-in, don't connect it to an emu10k1. MythTV won't like it! > > Thanks for bearing with me! > > Sérgio Gomes > > > _______________________________________________
Sweet thanks! I'm in the same boat, I'll try swapping soundcards and see what happens. Cool _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
