> At the prompt, you can use 'ivtvctl -a' to get a list of the card's > details and inputs - you'll need to specify the correct card too, so > use 'ivtvctl --help' to find out how. > > The output above will show all inputs the card has that the driver can > access (usually more than the number of actual physical inputs). You > can then use 'ivtvctl -p x' where x is the number of the input to > switch to that input and test. > > On my 350, I have 4 S-Video and 4 Composite inputs. On my 150 I have 2 of > each. > > You could also just cycle through the inputs in mythtv-setup and then > test each one to see which gives normal video. > > HTH, > Nick
That worked Nick. I captured from every input on both cards like this: ivtvctl --device=/dev/video1 -p 4 cat /dev/video1 > video1_input4.mpg Then just switched the input number and capture again. As it turns out my PVR250's composite input is on "Composite 4" in mythtvsetup. Working great now. Thanks for the help, James
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
