Using 2.6.11-6mdk kernel and I've renamed what I believe are the conflicting files:
[EMAIL PROTECTED] driver]# ls /lib/modules/`uname -r`/kernel/drivers/media/video/*.bak
/lib/modules/2.6.11-6mdk/kernel/drivers/media/video/msp3400.ko.gz.bak
/lib/modules/2.6.11-6mdk/kernel/drivers/media/video/tda9887.ko.gz.bak
/lib/modules/2.6.11-6mdk/kernel/drivers/media/video/tuner.ko.gz.bak
/lib/modules/2.6.11-6mdk/kernel/drivers/media/video/tveeprom.ko.gz.bak
I've tried 0.3.5t, 0.3.8, and the latest svn 0.3.9
Is anyone else using this combination? Did you have to do anything "special" to get it to work?
Hardware-wise, only the motherboard changed.
I'm at the begging/bribing stage.
Help!
Ryan
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.9 (development svn snapshot revision 2682) loading ivtv: Linux version: 2.6.11-6mdk 686 gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv info: Scanning PCI bus.. ivtv info: Found card #0 ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ivtv info: base addr: 0xd8000000 ivtv info: Enabling pci device ivtv info: Attempting to enable Bus Mastering ivtv info: Bus Mastering Enabled. ivtv info: 22 (rev 1) at 02:07.0, irq: 19, latency: 64, memory: 0xd8000000 ivtv info: attempting ioremap at 0xd8000000 len 0x00800000 ivtv info: attempting ioremap at 0xd9000000 len 0x00800000 ivtv info: attempting ioremap at 0xda000000 len 0x00010000 ivtv info: activating i2c... ivtv i2c: i2c init ivtv i2c: setting scl and sda to 1 tda9885/6/7: chip found @ 0x86 ivtv i2c: i2c client attach ivtv: i2c attach to card #0 ok [client=tda9887, addr=43] tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7827197 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv i2c: i2c client attach ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] cx25840: loading /lib/modules/HcwMakoA.ROM ivtv i2c: i2c client attach ivtv: i2c attach to card #0 ok [client=cx25840, addr=44] ivtv i2c: i2c client attach ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv i2c: i2c client attach ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] tuner: type set to 47 (LG NTSC (TAPE series)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. ivtv info: Active card count: 1. ivtv info: Loaded module tveeprom ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: using client 1, addr 0x50 ivtv info: NTSC tuner detected ivtv info: Loaded module tuner ivtv info: Loaded module cx25840 ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: using client 2, addr 0x44 ivtv info: Loaded module wm8775 ivtv info: Loaded module tda9887 ivtv info: Stopping VDM ivtv info: Stopping AO ivtv info: pinging (?) APU ivtv info: Stopping VPU ivtv info: Resetting Hw Blocks ivtv info: Stopping SPU ivtv info: Sleeping for 10ms ivtv info: init Encoder SDRAM pre-charge ivtv info: init Encoder SDRAM refresh to 1us ivtv info: init Decoder SDRAM pre-charge ivtv info: init Decoder SDRAM refresh to 1us ivtv info: Sleeping for 600ms (600 recommended) ivtv info: Card ready for firmware! ivtv info: Loading encoder image ivtv: loading /lib/modules/ivtv-fw-enc.bin ivtv info: Sleeping for 100 ms ivtv info: Sleeping for 100 ms ivtv info: GPIO INIT ivtv info: About to search for mailboxes ivtv info: Searching for encoder mailbox ivtv info: match: 0x34567812 at 0xd8e80104. match: 1 ivtv info: match: 0x56781234 at 0xd8e80108. match: 2 ivtv info: match: 0x78123456 at 0xd8e8010c. match: 3 ivtv info: found encoder mailbox! ivtv info: Searching for decoder mailbox ivtv info: match: 0x34567812 at 0xd9700104. match: 1 ivtv info: match: 0x56781234 at 0xd9700108. match: 2 ivtv info: match: 0x78123456 at 0xd970010c. match: 3 ivtv info: found decoder mailbox! ivtv info: Getting firmware version.. ivtv info: Getting encoder firmware rev. ivtv api: API Call: 0x000000c4 (IVTV_API_ENC_GETVER) ivtv api: Releasing mailbox (before 0x00000007, after 0x00000000) ivtv: Encoder revision: 0x02040011 ivtv info: v4l2 streams setup ivtv info: Configuring WinTV PVR 150 card with 5 streams ivtv info: Registered v4l2 device for encoder MPEG minor 0 ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv info: Registered v4l2 device for encoder YUV minor 32 ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv info: Registered v4l2 device for encoder VBI minor 224 ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv info: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv info: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv info: Allocate encoder radio stream ivtv info: Starting Threads ivtv irq: Masking interrupts ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: skipping client 2, addr 0x44 ivtv i2c: skipping client 3, addr 0x1b ivtv i2c: using client 4, addr 0x61 ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: using client 2, addr 0x44 ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: using client 2, addr 0x44 ivtv info: ivtv_enc_thread: pid = 9975, itv = 0xd6a00000 ivtv info: encoder thread sleeping 9975 ivtv info: ivtv_enc_vbi_thread: pid = 9976, itv = 0xd6a00000 ivtv info: encoder thread sleeping 9976 ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: skipping client 2, addr 0x44 ivtv i2c: using client 3, addr 0x1b ivtv info: Setting audio to input 0 ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: using client 2, addr 0x44 ivtv ioctl: VIDIOC_S_STD ivtv info: Switching standard to NTSC. ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: skipping client 2, addr 0x44 ivtv i2c: skipping client 3, addr 0x1b ivtv i2c: using client 4, addr 0x61 ivtv i2c: call_i2c_client ivtv i2c: using client 0, addr 0x43 ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: using client 2, addr 0x44 ivtv ioctl: VIDIOC_S_FREQUENCY ivtv api: API Call: 0x000000d2 (IVTV_API_PAUSE_ENCODER) ivtv api: Releasing mailbox (before 0x00000007, after 0x00000000) ivtv info: Disabling digitizer ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: using client 2, addr 0x44 ivtv info: v4l2 ioctl: set frequency 1076 ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: skipping client 2, addr 0x44 ivtv i2c: skipping client 3, addr 0x1b ivtv i2c: using client 4, addr 0x61 ivtv i2c: call_i2c_client ivtv i2c: using client 0, addr 0x43 ivtv api: API Call: 0x000000d3 (IVTV_API_REFRESH_INPUT) ivtv info: Enabling digitizer ivtv i2c: call_i2c_client ivtv i2c: skipping client 0, addr 0x43 ivtv i2c: skipping client 1, addr 0x50 ivtv i2c: using client 2, addr 0x44 ivtv api: API Call: 0x000000d2 (IVTV_API_PAUSE_ENCODER) ivtv api: Releasing mailbox (before 0x00000007, after 0x00000000) ivtv info: Finished with Mute ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
