> Robin Gilks wrote: > >>I guess the subject says it all really. Many of the howtos revolve about >>the 250 (old) and 350 (with output). I'm trying to find out which modules >>should be loaded when I modprobe the ivtv module. >> >> > The only module you should ever load is "ivtv". All other modules will > be loaded by ivtv (assuming you load ivtv correctly--using modprobe and > /not/ insmod). > >>I've already discovered that msp3400 doesn't get loaded (no dependency in >>modules.dep to the main ivtv module) so I'm wondering what else I have to >>load manually. >> >> > msp3400 is the driver for the sound processor for PVR-250/350. The > PVR-150 uses the cx25840. Therefore, if you load msp3400, at best, it > wastes memory and at worst, it causes conflicts. > >>I guess that since the header for saa7127.c says its an encoder, I need >> it >>but I assume that the decoder saa7115 is pvr-350 specific and so I don't >>load it! All very confusing!! No idea whether I have to pass any >>parameters across during loading since many of the howtos are either old >>or 350 specific :-(( >> >>I get video OK but so far audio only sometime on video, nothing from the >>radio and nothing from the line inputs. >> >>I'm running latest SVN (0.3.9+ == trunk) - not sure if there are any >>gotchas there. >> >>Any pointers appreciated. >> >> > modprobe ivtv > > and make sure you have the right module options. For 0.3.8+, that > should mean that you have no options specified for ivtv modules (it will > autodetect. > Thanks Mike
Thats exactly the definitive answers I was looking for :-)) All I need to do now is get external sound going (to complement the s-video input) and the radio (which scans OK & finds all the stations I'd expect it to) which also has no audio :-(( Cheers -- Robin Gilks _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
