On 20/09/05, Bob Honzik <[EMAIL PROTECTED]> wrote: > Hi Jochen, > > On 9/20/05, Jochen Kühner <[EMAIL PROTECTED]> wrote: > > I hope i can help you... > > > > The DVB data in your Tables in correct. > > > > The dvb_pids table is also no longer used! > > > > The pid is in the channel table and it is correct (I have only checked for > > "Das Erste") > > Well, I can see the service ID there in the channel table - e.g. 28106 for > Das Erste. But there should also be video, audio and videotext PIDs > somewhere, I think. I wonder where are they, then. Maybe they are negotiated > somehow "on the fly"? Btw. how do you select the desired audio channel on > Arte, if it is sending in German and french?
If you are recording in TS mode then use + and - to change the audio channel. Also there's some database config you can set which will auto select the correct stream. (sorry can't remember the setting) > My dvb_pids table is empty and therefore I assumed THIS is the reason why I > am not able to receive anything. Well, maybe the problem is somewhere > else... Bad assumption, at least if you're running later than 0.16. dvb_pids is no longer used (along with dvb_channel but that's been pointed out before). <snip> Daft question, but do you have your initial channel to tune to set to something appropriate e.g 28106 for "Das Erste" ? Regards. -- John _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
