> i have a vision plus DVB-T card with the conexant fusion 878a chipset. > > the card is seen on boot by fredora as the output from /sbin/lspci -v > > 00:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 11) > Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB card > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at ea000000 (32-bit, prefetchable) [size=4K] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > > 00:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 11) > Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB Card > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at ea001000 (32-bit, prefetchable) [size=4K] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > > > in /etc/modprobe.conf i have > alias char-major-81 bttv > > which was added for me by fredora, > i have since added > options bttv card=51 tuner=2 > this was to fix tvtime reporting no /dev/video0 device > > mythtv or tvtime do not pick up any chanels or signals from the card and > i am quite lost as to what to try now. > what do the ard=51 tuner=2 mean?
Not sure why there are bttv entries in modprobe.conf as that is for analogue cards. As this is a DVB card that looks wrong. Have a look at this to help you get it going - http://www.mythtv.info/moin.cgi/DigitalTvHowto Regards, Phill _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
