I would like some help with migrating Mythtv 0.18 from Mandrake to Gentoo. I have tried gentoo previously and have failed miserably. I would like to know why.
The hadware I have is
AMD 2800+
80gig hard drive
512 Meg RAM
Fusion Plus HDTV
Audigy2 Sound card
Nvidia GT6600
I can get the dvb card working using kernel 2.6.3 and linuxtv modules.
when I run dmesg my dvb card is found
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 18, latency: 32, mmio: 0xe2006000
bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00fb0ffe [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 18, latency: 32, memory: 0xe2004000
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
attach: "bt878 #0 [hw]", to card 0
DVB: registering new adapter (DST).
bt878 find by dvb adap: checking "DST"
dst_check_ci: recognize DTTDIG
DST type : terrestial TV
DST type flags :
DVB: registering frontend 0:0 (DST TERR)...
when I less /var/log/messages I can find twinhan fusionplus dvb-t card
Sep 27 17:32:24 mythtv kernel: bttv: driver version 0.9.12 loaded
Sep 27 17:32:24 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Sep 27 17:32:24 mythtv kernel: bttv: Bt8xx card found (0).
Sep 27 17:32:24 mythtv kernel: bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 18, latency: 32, mmio: 0xe2006000
Sep 27 17:32:24 mythtv kernel: bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
Sep 27 17:32:24 mythtv kernel: bttv0: using: Twinhan DST + clones [card=113,insmod option]
Sep 27 17:32:24 mythtv kernel: bttv0: using tuner=4
Sep 27 17:32:24 mythtv kernel: bttv0: add subdevice "dvb0"
Sep 27 17:32:24 mythtv kernel: bt878: AUDIO driver version 0.0.0 loaded
Sep 27 17:32:24 mythtv kernel: bt878: Bt878 AUDIO function found (0).
Sep 27 17:32:24 mythtv kernel: bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 18, latency: 32, memory: 0xe2004000
Sep 27 17:32:24 mythtv kernel: attach: checking "bt878 #0 [hw]"
Sep 27 17:32:24 mythtv kernel: find by pci: checking "bt878 #0 [hw]"
Sep 27 17:32:24 mythtv kernel: attach: "bt878 #0 [hw]", to card 0
Sep 27 17:32:24 mythtv kernel: DVB: registering new adapter (DST).
Sep 27 17:32:24 mythtv kernel: bt878 find by dvb adap: checking "DST"
Sep 27 17:32:24 mythtv kernel: dst_check_ci: recognize DTTDIG
Sep 27 17:32:24 mythtv kernel: DST type : terrestial TV
Sep 27 17:32:24 mythtv kernel: DST type flags :
Sep 27 17:32:24 mythtv kernel: DVB: registering frontend 0:0 (DST TERR)...
when I run lsmod I get
Module Size Used by
dst 13804 1
dvb-bt8xx 7620 0
dvb-core 58932 22 dst,dvb-bt8xx
bt878 11216 2 dst,dvb-bt8xx
tuner 17292 0
bttv 146956 3 dvb-bt8xx,bt878
video-buf 20388 1 bttv
i2c-algo-bit 9512 1 bttv
v4l2-common 6144 1 bttv
btcx-risc 4712 1 bttv
i2c-core 23044 4 dvb-bt8xx,tuner,bttv,i2c-algo-bit
videodev 9536 1 bttv
plus more
I run less /var/log/mythbackend
2005-09-27 17:33:11.360 Changing from None to WatchingLiveTV
2005-09-27 17:33:11.431 DVB#0 DVB SI Table Parser Started
2005-09-27 17:33:11.432 DVB#0 Using DVB card 0, with frontend DST TERR.
2005-09-27 17:33:11.434 DVB#0 WARNING - Unsupported inversion option 'auto', falling back to 'off'
2005-09-27 17:33:12.609 DVB#0 DVB signal 5800 | snr 5c00 | ber 0 | unc 0
2005-09-27 17:33:12.610 DVB#0 Status: LOCK.
2005-09-27 17:33:12.610 DVB#0 Multiplex Locked
2005-09-27 17:33:13.718 DVB#0 Successfully tuned to channel 7.
2005-09-27 17:33:13.719 DVB#0 Recorder: Card opened successfully (using PS mode).
2005-09-27 17:33:13.729 DVB#0 Data read from DMX - This is for debugging with transform.c
I am not sure if it's bloatness in mandrake but my HDTV play back is a little jumpy and
I get squeaks and pixels jumping across the screen.
My plan is to install Gentoo 2005.1. Can anyone help me in building gentoo so that it works
with my HDTV card? I don't know the difference between Twinhan VisionPlus DVB-T and
Divco VisionPlus DVB-T cards are they one in the same?
last time I built the gentoo box and configured the DVB card I didn't get a
/dev/dvb/adapter0/frontend0
directory structure but instead I got
/dev/dvb.adapter0.frontend0
I don't understand why, and mythtv, mplayer, xine could not find the card or the stream.
I would ultimately like to smooth my dvb, and dvd playback.
Thanks
Kevin
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
