Hi
I have a strange issue which is apparent on both of my frontends. Whilst
watching a recorded program the image will freeze and eventually drop
back to the selection screen.
Here is a log snippet from one frontend :
2005-09-27 11:55:07.032 write->18 50 QUERY_FILETRANSFER
20[]:[]REQUEST_BLO...
2005-09-27 11:55:07.050 Read(): reqd=128000, rcvd=128000, rept=128000, error=0
2005-09-27 11:55:07.233 write->18 50 QUERY_FILETRANSFER
20[]:[]REQUEST_BLO...
2005-09-27 11:55:07.277 Read(): reqd=128000, rcvd=128000, rept=128000, error=0
2005-09-27 11:55:07.515 write->18 50 QUERY_FILETRANSFER
20[]:[]REQUEST_BLO...
'video_output' mean = '39962.37', std. dev. = '13443.45', fps = '25.02'
2005-09-27 11:55:11.786 prebuffering pause
2005-09-27 11:55:11.786 waiting for prebuffer...
2005-09-27 11:55:11.869 WriteAudio: buffer underrun
2005-09-27 11:55:11.947 prebuffer wait timed out..
2005-09-27 11:55:11.948 waiting for prebuffer...
One of my frontends is in another room and I had been wondering if I had a
cabling issue, but the above comes from a frontend plugged into the same switch
as the backend.
At the point of failure the backend log doesn't show any errors (logging
verbose for playback,file,network) and if I restart the playback it will
happily run past the point of failure but then may ( or may not) fail again
later.
I've tested all my patch leads with a cable tester and 'sar -n ALL' on the
backend shows no collisions or tx or rx errors.
The b/e is FC3 kernel 2.6.12-1.1372_FC3, one f/e is the same and the other is
minimyth.
Any ideas where to start ? Or do I just need to start with ethereal and capture
a session ?
Cheers
Paul
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
