Hello Thanks for the info.
I am trying a dvbscan on the command line, below is the output. ./dvbscan /home/mythtv/uk-chesterfield scanning /home/mythtv/uk-chesterfield using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 578000000 0 3 0 3 0 0 0 >>> tune to: 578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSIO N_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSIO N_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. I have tried to use the 'scan channels' in the channel editor......but I get a similar error (no lock). I have checked the permissions and I get the same errors when I am runnng as root...so I don’t think it is a permissions thing. Can you think of anything else to try? Phil >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Neil >Sent: 27 September 2005 23:12 >To: Discussion about mythtv >Subject: Re: [mythtv-users] Nova-T DVB and FC4 > >Hi Phil, > >I'm an (almost) total noob to mythTV, but after a few weeks >playing with various configs, I've just finished getting my >Nova-T working on FC4. >Happy to help if I can (while its all still fresh in my mind!) > >What happens when you try and scan? Some error messages or >description of behaviour would be useful. > >In the meantime, here are some of the problems I had (and their >solutions) > >(1) If you're getting an error about signal lock, its because >you need to seed some of the values on the scan screen. I'm on >the Crystal Palace transmitter and found that by setting the >frequency to 505833330 and the bandwidth to 8mhz, the card >then scanned correctly and found all the freeview channels. > >(2) You need to ensure that the user you are running >mythtv-setup under has access to the dvb device. I'm sure all >of the following isn't necessary, and someone else could tell >you how to do it properly, but in /dev I set full access >(chmod 777) to video, video0, /dvb, /dvb/adapter0, >/dvb/adapter0/demux0, /dvb/adapter0/dvr0, >/dvb/adapter0/frontend0, and /dvb/adapter0/net0 > >HTH. > >Neil > >On Tue, 2005-09-27 at 19:15 +0100, Phil Smith wrote: >> Hello >> >> This is the first time I have posted here, so please go easy >on me :-) >> >> I have a Hauppauge Nova-T DVB card and I am trying to get ii to work >> under Fedora Core 4. I previously had this working under FC3 but >> after a complete rebuild and a change to FC4 I can no longer get the >> card to scan any channels. >> >> I was under the impression that all the linuxtv/v4l stuff >required was >> now in the stock kernel, but when that did not even >recognise the card >> I resorted to building my own kernel (2.6.13) and adding all the >> relevant modules. >> >> I also had to use a trick from Jarod's guide to get the >adapter0 nodes >> to appear. (http://svn.wilsonet.com/projects/mythtvology/ticket/15) >> >> The only problem seems to be getting the card to tune to the >the local >> Freevew (uk) transponder. >> >> Any advice would be appreciated. >> >> Thanks in Advance >> >> Phil >> >> -- >> No virus found in this outgoing message. >> Checked by AVG Anti-Virus. >> Version: 7.0.344 / Virus Database: 267.11.7/112 - Release Date: >> 26/09/2005 >> >> >> _______________________________________________ >> mythtv-users mailing list >> [email protected] >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >-- >No virus found in this incoming message. >Checked by AVG Anti-Virus. >Version: 7.0.344 / Virus Database: 267.11.7/112 - Release >Date: 26/09/2005 > > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.7/112 - Release Date: 26/09/2005
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
