Thanks for that Nick, Your solution would work with my dvb tuners, but unfortunately if I do that my rate conversion will no longer work and my analogue tuner will sound like mickey mouse.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nick Fasano Sent: Wednesday, 28 September 2005 8:36 AM To: [email protected] Subject: [mythtv-users] Re: Funny problem with alsa and AC3 passthrough /rate conversion > Everthing was working fine using ALSA:mixed-digital, but lately, if I > enable AC3 passthrough in the mythfrontend, my amp outputs a horrible > buzzing sound when it gets a dolby digital signal from myth. I was having the same problem with my amp and dolby digital. I solved it by removing my .asoundrc file and using ALSA:spdif as the output device. Then go into KMix and mess with the settings until it works. I discovered this through pure trial and error, but it now works properly and I don't mess with it. Hope that helps. Nick _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
