rc5 remote doesn't send the same signal everytime u press athe same button. it flips one bit/byte (can't remember now) when u press a button. so there are really 2 signals for the "power" button.
the usb-uirt2 driver doesn't seem to understand the lircd.conf hauppauge file that comes with lirc.. so i had to generate my own using irrecord.
I've attached my .lircrc file for your review.
In the harmony member website, i just matched my .lircrc button names to the buttons names specified for the pvr250 remote on the harmony member website.
On 9/29/05, Marius Schrecker <[EMAIL PROTECTED]> wrote:
Stanley wrote:
> I use USB-UIRT2 with the transmit/receive patch.
>
> Transmit side controls my Cable setupbox to change the channels when I
> tune
> mythtv.
>
> Receive side, mimics a hauppauge pvr-250 remote. For some reason, i
> couldn't
> use the lirc standard file for the pvr-250 remote. USB-UIRT2 LIRC driver
> doesn't seem to understand RC4 signal definitions, so I had to hack it
> myself.
>
> So on my Harmony 880 remote, I select "Hauppauge PVR-250" as my Mythtv
> remote..
>
> works great !
>
> my lircd.conf file is attached.
>
Thanks for the lircd.conf file. Are those the recommended key names for
Myth? Does anyone use different / more key mappings?
Your conf file looks very different from mine, with two sets of long codes
for each command, but I'm guessing that's something to do with sending
/receiving??
Marius
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
mylircrc
Description: Binary data
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
