On 03/10/05, Jim Householder <[EMAIL PROTECTED]> wrote: > Hi > > I'm making some progress with mythtv. Using the excellent guidance at > http://wilsonet.com/mythtv/fcmyth.php I have 0.18.1-114 running on FC4. > > Hardware: V-Stream DTV DVB-T, 2.4GHz P4, 1GB ram > > I can watch the composite input from a VCR ok, but no digital yet. > > I adjusted the permissions on /dev/dvb so the card can be seen and > identified ok, and the channel scan button is now active in the channel > editor. > > I'm stuck here. I have no idea how to set up the scan parameters. I > suspect 'auto' is sufficient for most. All I get is 'no lock'. I've > tried 571625000 for channel 34 (SBS in my area) and 520000000 (start of > the UHF band). > > What frequency should I use?
I seem to recall that, in the UK, there is at least one other parameter, apart from the frequency, that has to be entered explicitly. I used the tzap utility, part of the dvb-utils package, to generate all the parameters for me, which I then entered into the mythtv channel scan window. Hope this helps. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
