Well, after following Jarod's Fedora guide (excellent, btw), I've gotten
a rudimentary MythTV box up and running. However, I'm now at the point
where I want to go from my monitor out to my TV/component outs, and I'm
having a heck of a time with X trying to make it work. Here's my setup:
* Fedora Core 4
* Gigabyte 6200-based video card, w/component-out breakout box
* Latest (7676) nVidia drivers
* Dell 2405W monitor (hooked up to its component-inputs) for testing,
though eventually I want to hook it up to my projector in my media room
First, I thought I'd cheat, see if anybody was already using this
configuration, and just copy their xorg.conf. Well, no such luck. So,
per Jarod's advice I tried the PowerStrip route. Booting off of a
WindowsXP drive, I used PowerStrip to find settings for 720x480p and
tweeked the setttings until it looked decent (I'll worry about
perfection later). Here's the mode line that PowerStrip gave me:
Linux modeline parameters:
"720x480" 26.625 720 752 824 896 480 481 484 497 -hsync -vsync
So, I edited my xorg.conf file with the following
Section "Monitor"
Identifier "Monitor0"
VendorName "Some Vendor"
ModelName "HDTV"
HorizSync 31.5 - 37.9
VertRefresh 59.9 - 60.1
ModeLine "720x480" 26.625 720 752 824 896 480 481 484 497 -hsync
-vsync
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "720x480"
EndSubSection
Option "TVStandard" "HD480p"
Option "ConnectedMonitor" "TV"
EndSection
Now, at first, this failed completely, and X wouldn't even start. After
checking out my Xorg.0.log file, I saw that it didn't like the hsync
range of my 720x480 Mode. However, it did like the default 800x600
mode.! So, just for fun, I changed
Modes "720x480"
to
Modes "800x600"
Now, I'm getting closer (I think). X will start without errors, but I
only get a blank screen. I can drop down to a console, and I get text
via the component outputs, but when I switch back to X, just black.
Strangely, my monitor thinks it's getting a 480p signal, but I see
nothing ...
Is it possible this setup just won't work? Googling and searching
various forums about my configuration just brought results stating that
my configuration (6200, component outputs) was possible, but nothing
from anyone who actually got it up and running!
My X configuration skills are suspect at best, so I'm really not sure
how to even proceed from this point. I really want to get this
configuration up and running, though :) Any advice on where to go from
here would be appreciated.
Mark
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Hello,
Looking at the config it might be worth changing TVStandard to PAL or NTSC or whatever would be appropriate for your TV. Not sure tho...
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
