David Watkins wrote:
On 06/10/05, Steve <[EMAIL PROTECTED]> wrote:
my cable box uses cable
out, so I'm going with that but in only inputs on channel 3. Meaning the
tuner card needs to stay on channel 3. How do I make it do this?
OK - I misunderstood you. That's not a setup I'm familiar with. If I
understand you right, you're saying that when you change channel on
your cable box, then a different channel comes out of the output as
channel 3? In this case you shouldn't be feeding your cable output
input into the S-Video input of the PVR, because S-Video doesn't
support tuned signals, it's just a raw video input.
So I guess you feed your cable-box output into the co-ax/cable input
of the PVR and, in mythtvsetup, you just give every channel the
frequency corresponding to that of channel 3.
Or, you could set:
Preset tuner to channel
Leave this blank unless you have an external tuner that is connected to
the tuner input of your card. If so, you will need to specify the preset
channel for the signal (normally 3 or 4).
Mike
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
