I get no sound from non-digital sound sources using MythVideo. I prefer using xine as my default player, but have also tried with mplayer.
I assume there is some command line arguments that I need to add to xine to get it to work, but don't know what.
Here is my .asoundrc :
# Override the default output used by ALSA.
# If you do not override the default, your default
# device is identical to the (unmixed) analog device
# shown below. If you prefer mixed and/or digital
# output, uncomment the appropriate four lines below
# (only one slave.pcm line).
#pcm.!default {
# type plug
## Uncomment the following to use mixed analog by default
# slave.pcm "dmix-analog"
## Uncomment the following to use unmixed digital by default
# slave.pcm "digital-hw"
## Uncomment the following to use mixed digital by default
slave.pcm "dmix-digital"
#}
# Alias for analog output on the nForce2/4 (hw:0,0)
# - This is identical to the device named "default"--which
# always exists and refers to hw:0,0 (unless overridden)
# - Therefore, we can specify "hw:0,0", "default", or "analog"
# to access analog output on the nForce2/4
pcm.analog {
type plug
slave.pcm "analog-hw"
}
# Control device (mixer, etc.) for the nForce2 card
ctl.analog {
type hw
card 0
}
# Alias for (rate-converted) mixed analog output on the
# nForce2 (hw:0,0)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the dmix plugin
# (in this case 48000Hz)
pcm.mixed-analog {
type plug
slave.pcm "dmix-analog"
}
# Control device (mixer, etc.) for the nForce2 card
ctl.mixed-analog {
type hw
card 0
}
# Alias for (rate-converted) digital (S/PDIF) output on the
# nForce2 (hw:0,2)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.digital {
type plug
slave.pcm "digital-hw"
}
# Control device (mixer, etc.) for the nForce2 card
ctl.digital {
type hw
card 0
}
# Alias for mixed (rate-converted) digital (S/PDIF) output on the
# nForce2/4 (hw:0,2)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.mixed-digital {
type plug
slave.pcm "dmix-digital"
}
# Control device (mixer, etc.) for the nForce2 card
ctl.mixed-digital {
type hw
card 0
}
# The following devices are not useful by themselves. They
# require specific rates, channels, and formats. Therefore,
# you probably do not want to use them directly. Instead use
# of of the devices defined above.
# Alias for analog output on the nForce2 (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.analog-hw {
type hw
card 0
# The default value for device is 0, so no need to specify
}
# Control device (mixer, etc.) for the nForce2/4 card
ctl.analog-hw {
type hw
card 0
}
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
