Every so often, too often in fact it's getting very annoying, mythtv
fails to tune in a channel and misses the recording. The log of such an
event is below. Is there any way to tell it to retry when this happens,
and not just carry on, ignoring the error, and missing the show?
If I restart the backend when I notice it has done this, but the show
hasn't actually finished, then it tunes in and records what remains of
the show. So, all myth needs to do is see the error, and re-attempt the
recording.
2005-10-07 22:00:02.395 Started recording "Airtight" on channel: 1012 on
cardid: 1, sourceid 1
2005-10-07 22:00:02.544 scheduler: Last message repeated 2 times
2005-10-07 22:00:02.554 scheduler: Schedule Change
2005-10-07 22:00:04.501 DVB#0 DVB signal 6200 | snr 5000 | ber 817e7e8 |
unc b7006848
2005-10-07 22:00:04.502 DVB#0 Status: LOCK.
2005-10-07 22:00:04.504 DVB#0 Multiplex Locked
2005-10-07 22:00:10.512 DVB#0 Timeout Getting PMT
2005-10-07 22:00:10.515 DVB#0 ERROR - Tuning for channel #1025 failed.
2005-10-07 22:00:10.653 Changing from None to RecordingOnly
2005-10-07 22:00:10.697 DVB#0 Recorder: Card opened successfully (using
TS mode).
2005-10-07 22:00:10.700 DVB#0 ERROR - No PIDS set, please correct your
channel setup.
2005-10-07 22:00:11.705 DVB#0 WARNING - No data from card in 1 second.
2005-10-07 22:00:12.716 DVB#0 WARNING - No data from card in 1 second.
etc... etc... until the timeslot for the show is up.
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
