Hi, I'm a relatively new mythtv user, and I've run into two problems. These aren't myth issues, per se, but I figured the collective experts here might have some ideas.
So, I've got a myth box setup with a hauppage PVR-250. I'm using cable (comcast, in the LA, CA area), and I'm trying to run it direct into the tuner0 port of the pvr card. This is working for most channels when I have it set to us-cable-hrc, but channels above 40 aren't working - the signal is scrambled, I'm just getting audio. Looks like a pay-per-view channel, almost. It works fine when I plug the cable box back in and run it direct to the TV. I've been trying to avoid the cable box, as then I have to figure out how to get the serial port to change channels, but that's my fallback if I can't figure anything else out. My second problem is I have a Sony RM-VL1000 remote, which is a decent but cheap programmable remote. There doesn't seem to be a LIRC config file out there for 'em, so I was trying to create one via irrecord, but irrecord isn't getting any input from it. I know the ir setup is working in general, 'cause I've got the grey hauppage remote that came with the 250 working, and I can get irrecord to learn from that. In desperation I tried to teach the VL1000 the codes from the grey hauppage remote, then use that w/ irrecord, but that didn't work either. So, any thoughts? I've searched around on google a bunch, and been fairly unsuccessful. I greatly appreciate any help or suggestions people have - ;) my wife's patience with the me on this is wearing thin. thanks! dave
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
