On 10/9/05, Dennis Lou <[EMAIL PROTECTED]> wrote: > You just nearly described my exact setup > (M179 insteead of PVR150 and I'm on > the lower peninsula, though). I get ABC, NBC, > CBS, FOX, PBS in HD as well as INHD1, INHD2, > ESPN-HD and Discovery HD.
Dennis, thanks for that info. At least knowing someone else has this setup running boosts my confidence :) > 0. Install the firmware files. There's a script > in the /usr/src/linux tree but it's probably easier > to just download them from www.pchdtv.com and > cp them to /lib/firmware OK, I downloaded the firmware files from pcHDTV's website, and moved dvb-fe-or51132-qam.fw, dvb-fe-or51132-vsb.fw and dvb-fe-or51211.fw to /lib/firmware > 1. For kernel >= 2.6.12 (which you should > automatically get if you did a yum update), > DVB drivers are included with the stock kernel. > V4l also included for the analog mode. Use > /dev/dvb/adapter0 for the digital side and > /dev/video0 for the analog side. Be careful: > on my system, my PVR card got renumbered to > /dev/video1 so I had to reconfigure > myth to use that instead. OK, I think I'm stuck at this spot. I am running kernel 2.6.13-1.1526_FC4 (from the latest yum update). However, after completing the previous step and rebooting, I don't have anything under /dev/dvb. All I have is video (which is a symlink to video0), video0, video24 and video32. I tried running "modprobe bttv", and here's what I got: FATAL: Error inserting bttv (/lib/modules/2.6.13-1.1526_FC4/kernel/drivers/media/video/bttv.ko): Unknown symbol in module, or unknown parameter (see dmesg) dmesg give me: bttv: disagrees about version of symbol tveeprom_hauppauge_analog bttv: Unknown symbol tveeprom_hauppauge_analog Hmmmm. Getting closer, but I'm still not sure where to go from here ... > > 2. Get the CVS dvb-apps and run the script > attached to this message: > > http://www.gossamer-threads.com/lists/mythtv/users/150073?#150073 > > Clips of all the unencrypted streams it found > will be in the ./streams directory and a > consolidated list in zap (channels.conf) format > will be in list.txt > I got the latest CVS, but I can't get it to compile without errors. However, I have a feeling it's because I can't get past step 1 ... Mark _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
