This would make sense. It does appear that Comcast can query my set-top box but cannot receive information in return. The only concern I have with the splitter is that if I remove the amplifier and power supply from the setup, On Demand is still not available. I naively assumed that the splitter had no directionality when I bought it. I should test this by putting the input on one of the outputs and vice versa. I will also check that my amp is cable modem compatible. On 10/12/05, Carl Fongheiser <[EMAIL PROTECTED]> wrote: > > > On 10/12/05, jesse k <[EMAIL PROTECTED]> wrote: > > I have a MythTV/Gentoo box which is working very nicely. I've managed > > to enable all the functionality I want other than getting premium > > channels to work (the various HBOs). This is fine with me as On Demand > > obviates the need to record those shows. However, the hardware I've > > used to split and amplify my cable signal seems to interfere with the > > On Demand service. > > On Demand most likely requires use of a return channel, which your > amplifier may be blocking. If you can find an amplifier compatible with > cable modems, you likely will have found one that will work for you. The > splitter is most likely not the problem -- the frequency range you quoted is > adequate for cable modems and digital cable on most systems. > > Carl Fongheiser > > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
-- Jesse Kirchner [EMAIL PROTECTED] http://jessekirchner.com/ _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
