Thanks for your detailed answer! Am Sonntag, 16. Oktober 2005 19:14 schrieb Bruce Markey: > Thomas Bürger wrote: > > I am using 2 tuners (one DVB-T card and a PVR-350). Both offer the same > > channels (more or less), so I set all equal channels to the same database > > ID (by using the same name). > > To be clear, you should have two different video sources defined. > For the channels that carry the same station, the "callsign" should > be the same.
Yes, got this all to work. > > > Now I got some quality trouble on some channels on tuner 1 and so I would > > like to advice the recording to use tuner 2. But How do I do this? I set > > the > > You cannot specify the tuner but presumably you have one source > for DVB associated with the DVB input and a source for the analog > channels associated with the PVR-350's input. Ok, understood.. > > > priority of the channel on the second tuner (PVR) to 1 as the priority of > > the tuner 1 channel is 0 but this seams not to work. > > I do this all the time. In fact, I use chanel priorities to switch > which input is preferred sometimes for special cases. Hm ... I did this through the mythweb-frontend and it seams not to work, but I will test that tonight - maybe I did something wrong there. Even if I'm not a real expert in mysql, I will try to follow your guide, to see if something is missing. > > mysql> select sourceid,name from videosource; > +----------+--------------+ > > | sourceid | name | > > +----------+--------------+ > > | 1 | CoxCableDD | > | 2 | CoxDigitalDD | > > mysql> select chanid,sourceid,channum,callsign,recpriority from channel > where callsign='KVBC'; > +--------+----------+---------+----------+-------------+ > > | chanid | sourceid | channum | callsign | recpriority | > > +--------+----------+---------+----------+-------------+ > > | 1003 | 1 | 3 | KVBC | 0 | > | 2123 | 2 | 123 | KVBC | 0 | > > KVBC is on analog 3 and digital 123. My analog inputs are lower > numbered than my digital so it prefers channel 3 by default. > > --- print list start --- > Title - Subtitle Chan ChID Day Start End S C I T N > Pri LPGA Golf - "Samsung World Champion 3 1003 16 10:00-13:59 1 1 1 S > 1 3 > > > If I go to TV Settings->Recording Priorities->Set Channel Recording > Priorities, I can lower the priority for 3 to give showings on 123 > the advantage. I don't want to give 123 an advantage over all other > channels so I lower 3 to gain this effect. good point ... > > mysql> select chanid,sourceid,channum,callsign,recpriority from channel > where callsign='KVBC'; > +--------+----------+---------+----------+-------------+ > > | chanid | sourceid | channum | callsign | recpriority | > > +--------+----------+---------+----------+-------------+ > > | 1003 | 1 | 3 | KVBC | -1 | > | 2123 | 2 | 123 | KVBC | 0 | > > --- print list start --- > Title - Subtitle Chan ChID Day Start End S C I T N > Pri LPGA Golf - "Samsung World Champion 123 2123 16 10:00-13:59 2 2 6 S > 2 3 > > The priority for "LPGA Golf" is 0, Single record is +3 so the total > priority for a single LPGA Golf on 123 is +3 but only +2 on channel > 3 so 123 wins. If there was a higher priority show that needed the > digital input then "LPGA Golf" would record on channel 3 from one of > the analog inputs. thanks again - Tom _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
