Hi David, Thanks for the response, I think you may have hit the nail on the head !
> I got these from tzap and, as I say, they worked for me. How did you get tzap to do this ? I can't see an option for this ! Can't see a version number in tzap either (downloaded 20th April I think). Can you post the full output of tzap showing you this config ? thanks Can anyone tell me where mythtv stores this dvb tuning information ? I presume in the database although I'm not sure. I think it may be highly possible that the config that mythtv is looking at may be different to that which tzap is using. Simon On 10/23/05, David Watkins <[EMAIL PROTECTED]> wrote: > On 23/10/05, Simon Allcorn <[EMAIL PROTECTED]> wrote: > > Hi, > > > > I'm having trouble to get myth-tv to tune into a transport stream with > > my DVB card (nova-t). If I use mythtv-setup and select Channel > > editor/Scan for channels/Full scan I get the following: > > > > ... > > 2005-10-23 14:39:07.661 DVB#0 DVB SI Table Parser Started > > 2005-10-23 14:39:07.662 DVB#0 Using DVB card 0, with frontend LSI L64781 > > DVB-T. > > 2005-10-23 14:39:07.686 DVB#0 DVB Signal Monitor Starting > > 2005-10-23 14:39:08.728 DVB#0 DVB signal f0f | snr 0 | ber ffff | unc 0 > > ... > > 2005-10-23 14:39:40.498 DVB#0 DVB signal e0e | snr 0 | ber ffff | unc 0 > > 2005-10-23 14:39:41.477 DVB#0 DVB signal f0f | snr 0 | ber ffff | unc 0 > > 2005-10-23 14:39:42.097 DVB#0 WARNING - Status: NO LOCK! > > > > Which suggests that the signal strength is too weak, however both > > mplayer and tzap tune and work fine - for every transport ! (see > > below) > > > > So I'm a little stumpped - I Can use my DVB card for all channels / > > transports but myth-tv can't ! > > > > help ! - has anyone got any idea what's happening here ? > > > > Cheers > > I've no idea what your problem is but I'm using a nova-t on the > Crystal Palace transmitter so you could check that you're using the > same mythtv scan parameters that worked for me. I used: > > freq 505833330 > B/W 8MHz > Inversion Auto > Constellation QAM 16 > LP Coderate 3/4 > HP Coderate 3/4 > Trans Mode 2K > Guard Interval 1/32 > Hierarchy None > > I got these from tzap and, as I say, they worked for me. > > Good Luck. > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
