dave sailer wrote:
>I have had a pvr250 for some time and recently started having problems >with choppiness/slowdown. I see the following out of mythfrontend.... > > >2005-10-22 16:44:05.505 New DB connection, total: 1 >Total desktop width=800, height=600, numscreens=1 >2005-10-22 16:44:05.509 Using screen 0, 800x600 at 0,0 >2005-10-22 16:44:05.511 mythfrontend version: 0.18.1.20050510-1 >www.mythtv.org >2005-10-22 16:44:05.511 Enabled verbose msgs : important general >2005-10-22 16:44:05.600 Switching to square mode (blue) >2005-10-22 16:44:05.768 Registering Internal as a media playback plugin. >2005-10-22 16:44:05.774 Registering MythDVD DVD Media Handler as a media >handler2005-10-22 16:44:05.775 Registering MythDVD VCD Media Handler as >a media handlermythtv: could not connect to socket >mythtv: Connection refused >lirc_init failed for mythtv, see preceding messages >2005-10-22 16:44:06.108 Registering MythMusic Media Handler as a media >handler >2005-10-22 16:44:08.991 New DB connection, total: 2 >2005-10-22 16:44:09.016 Connecting to backend server: 192.168.1.102:6543 >(try 1 of 5) >2005-10-22 16:44:09.023 Using protocol version 15 >2005-10-22 16:44:09.049 Using protocol version 15 >2005-10-22 16:44:11.345 Opening audio device '/dev/dsp'. >2005-10-22 16:44:11.345 Opening OSS audio device '/dev/dsp'. >2005-10-22 16:44:11.355 Using XV port 105 >X Error: BadMatch (invalid parameter attributes) 8 > Major opcode: 140 > Minor opcode: 14 > Resource id: 0x1b0 >2005-10-22 16:44:11.359 Couldn't get the color key color, and we need it. >You likely won't get any video. >2005-10-22 16:44:11.505 Changing from None to WatchingLiveTV >2005-10-22 16:44:11.509 Realtime priority would require SUID as root. >2005-10-22 16:44:11.854 Video timing method: SGI OpenGL >decoding error >decoding error >decoding error >decoding error >------------------------------------------------------------------------ >I believe I have always gotten the error "Couldn't get the color key >color, and we need it. >You likely won't get any video" and it didn't seem to be a problem. I >did recently install another pvr150 but it was happening before that. I >get it with live tv or watching recordings thru myth. If I watch >recordings thru mplayer, I don't have this problem. > >here is output from dmesg... >Linux video capture interface: v1.00 >ivtv: ==================== START INIT IVTV ==================== >ivtv: version 0.4.0 (tagged release) loading >ivtv: Linux version: 2.6.11-gentoo-r9 SMP preempt K7 gcc-3.3 >ivtv: In case of problems please include the debug info >ivtv: between the START INIT IVTV and END INIT IVTV lines when >ivtv: mailing the ivtv-devel mailinglist. >ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based) >ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, high) -> IRQ 18 >ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >tveeprom: ivtv version >tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8181626 >tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50) >tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) >tveeprom: audio processor = CX25841 (type = 23) >tveeprom: decoder processor = CX25841 (type = 1c) >ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] >tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 >ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >cx25840 3-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) >cx25840 3-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes) >ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] >wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) >ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] >ivtv0: loading /lib/modules/ivtv-fw-enc.bin >ivtv0: Encoder revision: 0x02050032 >ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) >ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) >ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) >ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB >total) >tuner: type set to 50 (TCL 2002N) by ivtv i2c driver #0 >ivtv0: Initialized WinTV PVR 150, card #0 >ivtv: ====================== NEXT CARD ====================== >ivtv1: Autodetected WinTV PVR 250 card (iTVC16 based) >ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 >ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 16 (level, high) -> IRQ 16 >ivtv1: Unreasonably low latency timer, setting to 64 (was 32) >tveeprom: ivtv version >tveeprom: Hauppauge: model = 32552, rev = C168, serial# = 7245920 >tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) >tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) >tveeprom: audio processor = MSP4448 (type = 1b) >tveeprom: decoder processor = SAA7115 (type = 13) >ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] >tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 >ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] >tda9885/6/7: chip found @ 0x86 >ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] >saa7115 4-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) >ivtv1: i2c attach to card #1 ok [client=saa7115, addr=21] >msp34xx: init: chip=MSP3448W-B3 +nicam +simple +simpler +radio mode=simple >msp3410: daemon started >ivtv1: i2c attach to card #1 ok [client=MSP3448W-B3, addr=40] >ivtv1: loading /lib/modules/ivtv-fw-enc.bin >ivtv1: Encoder revision: 0x02050032 >ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) >ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) >ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) >ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB >total) >ivtv1: Create encoder radio stream >tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1 >ivtv1: Initialized WinTV PVR 250, card #1 >ivtv: ==================== END INIT IVTV ==================== >lirc_dev: IR Remote Control driver registered, at major 61 >bttv: driver version 0.9.15 loaded >bttv: using 8 buffers with 2080k (520 pages) each for capture >lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150)) >ivtv0: i2c attach to card #0 ok [client=Hauppauge IR (PVR150), addr=71] > > > > >_______________________________________________ >mythtv-users mailing list >[email protected] >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > bump ... anyone? _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
