Hi Steve On Wednesday 26 October 2005 02:01, Steve Pugh wrote: > > this evening, I experienced 3 total machine lockups > > on my mythbox. I had to > > hard reset it. That same machine has been running > > for months, no apparent > > hardware problems. > > > > Does anybody have a clue what is going on? > > Hi Joe, > > I can't offer anything specific, but I've had > something similar happen to me (system hang when > trying to delete a corrupted .nuv file from MythWeb). > I'd say it's safe to say that something earlier had > corrupted the .nuv and the transcoder just couldn't > deal with it. > > If you have any logs going back to when that clip was > recorded, that might give you some insight into what > caused the corruption.
Hm, really nothing special here. The log is, ehrm, very normal: 2005-10-25 19:27:01.906 Started recording "Tagesschau" on channel: 1 on cardid: 2, sourceid 1 2005-10-25 19:27:02.158 scheduler: Last message repeated 1 times 2005-10-25 19:27:02.191 scheduler: Schedule Change 2005-10-25 19:27:02.589 Changing from None to RecordingOnly 2005-10-25 20:00:00.001 Finished recording Tagesschau on channel: 1 2005-10-25 20:00:00.070 scheduler: Finished recording 2005-10-25 20:00:00.103 Changing from RecordingOnly to None 2005-10-25 20:00:00.104 Reschedule requested for id 0. 2005-10-25 20:00:01.297 Scheduled 39 items in 1.2 = 0.00 match + 1.19 place 2005-10-25 20:00:01.309 scheduler: Scheduled items 2005-10-25 20:00:10.341 New DB connection, total: 2 2005-10-25 20:00:10.376 Transcoding from /myth/rec/1_20051025192700_20051025195000.nuv to /myth/rec/1_20051025192700_20051025195000.nuv.tmp And then, probably minutes later, the crash (I can tell because I control the machine from outside, and alarms started to trickle in at 20:04, when the check interval is 5 minutes). > I realize that's an obvious and incredibly lame > response, but I thought I'd at least give you a shout > back so you knew you weren't alone ;-) I appreciate that, really :-) I was starting to get nervous that it would be a heat problem or somesuch. Now, after deleting that one specific recording, things are normal again. The box recorded 4 clips since yesterday and transcoded them successfully. Besides, I pondered the machine with some CPU intensive jobs just to verify that heat would not be a problem. I hope that this was a unique incident .. CU, Joe _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
