Thanks, I found the problem... as soon as I put the 811 back on remote code 1 it all started to work as intended.
> I have my Dishnetwork 811 working with the following in my LIRC config > > begin remote > > name 811 > bits 16 > flags SPACE_ENC > eps 30 > aeps 100 > > header 400 6100 > one 400 1700 > zero 400 2800 > ptrail 400 > gap 6200 > min_repeat 4 > toggle_bit 0 > > frequency 56000 > > begin codes > power 0x0000000000000800 > 0 0x0000000000004400 > 1 0x0000000000001000 > 2 0x0000000000001400 > 3 0x0000000000001800 > 4 0x0000000000002000 > 5 0x0000000000002400 > 6 0x0000000000002800 > 7 0x0000000000003000 > 8 0x0000000000003400 > 9 0x0000000000003800 > up 0x0000000000006800 > select 0x0000000000004000 > cancel 0x0000000000004800 > end codes > > end remote > > > - Kevin > > Sergio P. Cesar wrote: > >>Any one could give me some ideas how to get the baster to change channels >>on a Dish HD 811 Echostar, I have followed the instructions here: >>http://losdos.dyndns.org:8080/public/mythtv-info/MythTV_DISH_IR_LED_TX_via_Modified_LIRC.html >>All seemd to install ok, no errors but it does not change anything. >>I know my home made blaster works on a DTV box out of ttyS0. >>Sample config files would be great. :) >> >>Thanks >> >>Sergio >> >>_______________________________________________ >>mythtv-users mailing list >>[email protected] >>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >> >> >> >> > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
