On 11/1/05, Julian Edwards <[EMAIL PROTECTED]> wrote:
I will try that, I've had it running well for a couple days now by not transfering data as much as I was doing (doing all my transcoding on the backend machine). I've been in the process of backing up all my dvds onto my drive, so it's really putting a crimp in my plans to only have one machine working on them at once.
The NIC is looking very suspect at the moment, which is a pity since I specifically bought this board for the onboard gigabit nic and the onboard optical s/pdif out.
Ryan Steffes wrote
> Changing to acpi=off did not fix the problem. I'm a little concerned
> with whether it's really off though, it seems to turn on local apic
> before reading the kernel options:
You will also need to clear the ECSD memory in the BIOS to make it
reassign the IRQs. It's either labelled "reset ECSD" (or ESCD, my
memory is crap) or something like "clear NVRAM". If there's nothing
like that then you may need to clear the whole BIOS settings with the
mobo jumper.
What sound card are you using in the system? SBLive cards have known
problems.
_______________________________________________
I will try that, I've had it running well for a couple days now by not transfering data as much as I was doing (doing all my transcoding on the backend machine). I've been in the process of backing up all my dvds onto my drive, so it's really putting a crimp in my plans to only have one machine working on them at once.
The NIC is looking very suspect at the moment, which is a pity since I specifically bought this board for the onboard gigabit nic and the onboard optical s/pdif out.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
