On Mon, Nov 07, 2005 at 08:10:08AM +0100, Rudy Zijlstra wrote: > Rod wrote: > > >On Sun, Nov 06, 2005 at 11:47:30PM +0100, Rudy Zijlstra wrote: > > > > > >>Rod wrote: > >> > >> > >> > >>>Greetings, > >>> > >>>I've been happily using MythTv with one tuner (PVR-250) for quite a > >>>while. Now I have decided to add another tuner (PVR-350). > >>> > >>>How does one configure it so that sound is working for both cards? > >>> > >>>I can get one or the other working but not both. I've used Jarrod's > >>>instructions resulting in the following modprobe.conf > >>> > >>> > >>> > >>> > >>> > >>You do not tell us which version of ivtv you are using. Try 0.4.0 or > >>0.4.1 and tell us the result. And include the ivtv messages in > >>/var/log/messages if you still have problems... > >> > >> > > > >Sorry, I'm not used to including a long log listing in a first post to > >a mailing list. Normally it gets me into trouble. :-) I'm using 0.4.0. > >Here's the output where the msp3400.ko was commented out > >Nov 6 16:10:32 mythbox kernel: msp34xx: ivtv version > >Nov 6 16:10:32 mythbox kernel: msp34xx: init: chip=MSP3448W-A2, has NICAM > >support, simple (D) mode, simpler (G) no-thread mode Nov 6 16:10:32 > >mythbox kernel: msp34xx: $Id$ compiled on: Oct 21 2005 02:12:13 > >Nov 6 16:10:33 mythbox kernel: ivtv0: i2c attach to card #0 ok > >[client=MSP3448W-A2, addr=40] > >Nov 6 16:10:33 mythbox kernel: tda9885/6/7: chip found @ 0x86 Nov 6 > >16:10:33 mythbox kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, > >addr=43] > >Nov 6 16:10:33 mythbox kernel: ivtv0: Failed to load module msp3400 > >Nov 6 16:10:35 mythbox kernel: msp34xx: $Id$ compiled on: Oct 21 2005 > >02:12:13 > >Nov 6 16:10:35 mythbox kernel: ivtv1: i2c attach to card #1 ok > >[client=MSP3445G-B8, addr=40] > >Nov 6 16:10:35 mythbox kernel: ivtv1: Failed to load module msp3400 > >N > >Still only get sound from one of the cards. > > > >Rod > > > You're having problems with the msp3400 module. Remove the alias you've > likely setup and try either with the msp3400 from the kernel, or replace > the kernel module with the ivtv module.
It appears so but I'm still not sure how to fix this. I tried unloading/loading both the msp3400 and msp3400-ivtv with no success. The sound output still keeps switching from the 250 to the 350 but I cannot get sound out of both for the same module configuration. > I am not an FC expert (have never liked the RedHat distro's), so can't > tell you how to remove the alias Neither am I. I'm using Fedora because there are instructions available. I would use a different distro if it might prove easier to configure, get working and maintain. Is a PVR-250/350 combination known to work? Rod > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
