Hi Karsten, I noticed this too, I got DR 1 on channel E5 (via the roof), try to "fix" the channel numbers by removing the letters (E,S) in mythtv-setup og myhthweb.
Or you could try the set the channel display to database order on the client side. - Emil On 11/11/05, Karsten Jeppesen <[EMAIL PROTECTED]> wrote: > Area: europe-west. > The PVR-150 defines the following channels: > E2-E12 > SE13-SE20 > 21-160 > > My channel lineup is: > E2 48.250 MHz DR1 > E3 55.250 MHz DR2 > E4 62.250 MHz TV2 > E5 175.250 MHz TV2 Zulu > E6 182.250 MHz TV3 > E7 189.250 MHz TV2 Charlie > E8 no channel > E9 203.250 MHz 5 > E10 210.250 MHz 3+ > E11 217.250 MHz Animal Planet > E12 224.250 MHz TV Danmark > SE13 245.250 MHz DK4 > SE14 252.250 MHz Discovery > SE15 259.250 MHz Cartoon Network / TCM > > So I tried to input the channel numbers as E2, SE13 etc. > MythTv will accept that except for that the order has to be > "channel-alpha" or "database". Thats not the problem. > But once I ask the frontend to use these channels I get nothing. Just > statics. > The log says that these channels are not available and I should check > for channels like E2, E3 etc. So clearly MythTv reads the channel list > from the card. > I can get tv fine if I use mplayer (its a mpeg2 stream) to play from > /dev/video and I can change channels fine using ivtvctl. > > But how do I get MythTV to accept the channels? What am I doing wrong? > > Karsten > > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > -- /Emil _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
