Hello,
I'd think that a slightly faster processor may be a good idea. Since
you are using a Socket A board, it isn't too hard to buy a ~$60 1.8
GHz Sempron or something that would probably help a fair bit. Also,
if you have the option of a SATA hard drive, that will be easier to
work with than your PATA drive in your case.
But keep in mind, those are recommendations-- your setup isn't
horrible by any means.
Brandon
On Nov 13, 2005, at 7:12 PM, jay [33-rpm.net] wrote:
hello,
first post to the list and figured it was about time being i am
just about to start my first myth setup. i am building a custom
case that will included the following hardware:
1 x fic az11e socket a via kt333 chip set
onbaord audio : embedded in VIA 686B
1 x amd xp 1.3 GHz 200MHz fsb
3 x 512MB pc133 ddr
1 x hauppauge wintvV-pvr 350
1 x msi geforce4 mx440 agp bus 250mhz ddr64mb tv-out 3d
1 x 250gb pata
1x dvd-rom drive
1 x soyo internal 9in1 card reader
1 x intel 1000 gigabit dual port pci adapter
do you see any problems with the hardware configuration? also i
was thinking of running debian unstable as the os? can someone
recommend a better route. ie one of the specialized distros.
any help would be greatly appreciated.
thanks jay
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
