>Quite worrying if this config is not working - are you sure LIRC is >actually working properly and creating the correct /dev devices? If >you are starting LIRC as a service, try > ># service lircd status >
This reports : lircd (pid 1173) is running... I can start and stop lircd using service without it showing any sort of error. >and see what it reports (I've had instances where LIRC was hanging >(LIRC dead, subsystem locked message). The Hauppauge remotes use the >RC5 control code set, so you should be able to use irrecord specifying >the RC5 config file available from lirc.org. > What exactly do you mean by 'use irrecord specifying the RC5 config file'? I've tried running irrecord to build a lircd.conf file (as reported in my post) it works after a fashion but it seems to get various things wrong (misnamed buttons etc). >Finally, what type of receiver are you using (PVR or serial Rx) and >what output does irw give? > My receiver and remote are a PVR-350 and the black and grey (coloured buttons around the cursor keys) control which came with it. This rig has worked in the past. It is only since I was screwing around with updates etc that it stopeed working. >I no longer use this remote (but do have the PVR-350), and don't have >the old config to hand, but I remember the lirc.org config was fine >for me (using lirc 0.7.0 a year ago). > >Nick > Thanks for the post. Regards Marty
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
