[EMAIL PROTECTED] wrote:
Thanks for the link. I have followed it but I cant seem to get anything
out of Step 8. Everything up to this step seems to have worked but when I
run this step I dont seem to be getting anything out of the IRBlaster. I
tried the digital camera trick as well and I didnt see anything either.
When I try to run another irsend command after the first one I get the
following error:
./irsend: could not connect to socket
./irsend: Connection refused
Anyone have any ideas.
Dave
Hmm I had this problem at some point, not sure how I fixed it.
Make sure lircd is loaded at startup and make sure you are using the
right device in the send script.
I know on Gentoo it ended up being /dev/lirc/0 and not /dev/lirc0.
Also check to make sure that lirc_i2c is not loading,
I would also check the comments on that same page (and all other posts
for the irblaster) and see if someone else asked the same question.
Mark is very good at answering questions people have on his blog and
there may be some insight there.
Lee
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
