OK, I got it to work late last night.... But I
patched the kernel to load the frame buffer earlier and now I can't
tune... (See separate post)
Thanks for the help.
I'll just keep plugging along....
Jacob Steenhagen wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 11/15/05, Brent Backstrom <[EMAIL PROTECTED]> wrote:
Trying to put together a myth installation and ran into a snag.
testing by doing....
dd if=/dev/video of=/dev/video16 bs=64k
I get sound out of the PVR-350 outputs, but no output from the composite
video?
IIRC, in order to get both sound and video using dd, I had to run the
following sequence (this is from memory, so there may be typos.... and I
think the fact that this is from memory proves I've done it way too many
times :):
ivtvctl -p 4
ivtvctl -u 0x3000
ivtvfbctl /dev/fb1 -noglobalalpha -localalpha
dd if=/dev/video0 of=/dev/video16
I don't claim to know what each command does, but I would suspect that the
one you really need is the ivtvfbctl one...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
iEYEARECAAYFAkN7gRcACgkQPFshtZHeR6kdCwCfeGNHC000R+Kc8p+5YjVqqJ4g
mD8An1ohtHItzh6W8QrSu/2wkIOfAl0I
=8CCP
-----END PGP SIGNATURE-----
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
--
-------------------------------
Brent Backstrom
Penn State University
Sr Systems Engineer
[EMAIL PROTECTED]
-------------------------------
|
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
