On Sunday 20 November 2005 11:31, SpEnT wrote: > > I'd say don't waste your time fixing it. Most likely, you don't want to > > use an S-Video cable on the 57" TV because S-Video limits you to NTSC > > (and NTSC is almost 52-year-old technology--it turns 52 on Dec 17). > > Instead, get a more appropriate cable (VGA/DVI, depending on your TV) > > and a good modeline and never look back. Assuming it's a 57" 720p TV, > > set it up with 1280x720 pixels. If it's a 57" 1080p TV, set it up with > > 1920x1080 pixels. > > Thanks Mike, I'm going to take this advice. I ordered a DVI-HDMI cable > yesterday so hopefully this helps. I think when I checked the TV > settings it showed it as a 1080i so I'll see if I can get the > 1920x1080 resolution once I get the cable in. I'll post back with > successes/failures or future trouble shooting :-) > > Incidentally I don't suppose you have a mode line for 1080i? I used to > have a link to a site that calculated mode lines but I can't seem to > find it. If not I'll just google more. Thanks again, > > -- > Lonny
http://www.mythtv.info/moin.cgi/Modelines -- Steve _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
