> Go into the channel editor and make sure you have valid UK channel > numbers for the 5 channels you have defined (i.e. between 20-69). E6 > is I think a European channel number, which is why you are getting the > error messages. I assume since you are getting some video, you > currently have the Tuner0 configured against a video source (analog TV > channels?) > > If you make sure you have the correct XMLTVIDs for each channel, you > should be able to get listings too. > > Nick
Thanks for the reply Nick. This is what I have in the 'channels' table in the database. I have put the frequencies in place if the ID's (Thanks Ronald) but I still get the same results. 1001 1 551.250 1 1001 BBC1 Scotland 0 scotland.bbc1.bbc.co.uk 0 32768 32768 32768 32768 Default 0 1 0 NULL NULL NULL 1002 2 519.250 1 1002 BBC2 Scotland 0 scotland.bbc2.bbc.co.uk 0 32768 32768 32768 32768 Default 0 1 0 NULL NULL NULL 1004 4 471.250 1 1004 Channel 4 0 channel4.com 0 32768 32768 32768 32768 Default 0 1 0 NULL NULL NULL 1005 5 687.250 1 1005 Five 0 channel5.co.uk 0 32768 32768 32768 32768 Default 0 1 0 NULL NULL NULL 1003 3 495.250 1 1003 ITV1 Border Scottish 0 scottish.border-tv.com 0 32768 32768 32768 32768 Default 0 1 0 NULL NULL NULL I was expecting to see some strange entries, but it all looks ok to me (but I know zilch about this stuff) One of the things I don't understand is - when I try to change channel and get the 'Please verify channel' error. It mentions a lot of channels. The list in my first posts was just a snippit. Using ivtv-tune to find my channels I used the following; ivtv-tune -teurope-west -c31 -d/dev/video0 This gave me 551.250Mhz and the channel was BBC1 ivtv-tune -teurope-west -c27 -d/dev/video0 This gave me 519.250Mhz and the channel was BBC2 ivtv-tune -teurope-west -c24 -d/dev/video0 This gave me 495.250Mhz and the channel was ITV ivtv-tune -teurope-west -c21 -d/dev/video0 This gave me 471.250Mhz and the channel was Ch4 ivtv-tune -teurope-west -c48 -d/dev/video0 This gave me 687.250Mhz and the channel was Five Does the content of my 'channel' table look ok? Any more suggestions would be most welcome - as I'm at a loss to know what to try next. -- Patrick
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
