Kevin Kuphal wrote:
Brad Fuller wrote:
I mentioned in another msg that I have an HD3000 and a PVR-250.
While my 250 remote worked fine before in myth, it doesn' t now that
I added the HD3000.
It works fine outside of myth using irw: the button presses are
indicated on the commandline correctly. But, I don't know why they
don't work inside of mythtv. I suppose it is because of HD3000 took
over the /dev/video0 and the PVR-250 was relinquished to video1.
Is that what it could be?
Can you have multiple remotes operating on the different cards? I
don't see how that would work inside of myth.
Maybe you can only assign one card for livetv? If so, how?
thanks for any pointers!
I'm not sure of your issue specifically, but to answer your questions
about remotes, the remote has nothing to do with the card
specifically. Your PVR-250 capture card is really 2 devices to Myth,
a video device (/dev/video(0|1)) and an LIRC device (the IR receiver
part). As long as LIRC is able to communicate with the remote it
should work. That being said, double check your ~/.mythtv/lircrc file
which is the one that MythTV uses if you are set up for native LIRC
support. It could be, for whatever reason, that you have your
~/.lircrc file which LIRC by default uses set up right, but are
missing the entries in ~/.mythtv/lircrc which Myth uses.
Thanks for the msg.
The remote worked fine before with the PVR-250. It's only when I put the
HD3000 in and started myth that Mythtv didn't recognize it.
As I said, irw indicates that lirc is working fine. So, I don't know why
it won't change channels, select, etc.
brad
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
