On Mon, 28 Nov 2005 07:23 pm, Pascal Favre wrote: > Since I use the new firmware and ivtv-4.0: > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > > I see sometimes ghosting. Too bad I can not find out if it happened on my > PVR350 or PVR500, since myth does not save this information. > > Previous firmware never showed ghosting. > Since it did not happen often, and my PVR500 has higher priority than > PVR350 (because I noticed a slanted pattern on some channels on PVR350 > maybe due to interference) I can not tell if it happened on the PVR350. I > also didn't try to revert to the previous stable firmware: > ivtv: Encoder revision: 0x02040011 > ivtv: Decoder revision: 0x02020023 > > Which firmware do you use? > Try the previous stable firmware. > > Pascal > > ----- Original Message ----- > From: "David Erickson" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Monday, November 28, 2005 3:51 AM > Subject: [mythtv-users] PVR350 recordings have slight trailing motion > sinceupgrade > > >I just upgraded from Mythtv .16 to the latest and I am now running FC4. > > For some reason which i can't figure out, all new recordings have > > trailing motion and thus poor quality on playback. The existing > > recordings that i saved and put back on the freshly installed box look > > perfectly fine when played on the TVOut on the PVR350. So it's just new > > recordings so it has to be some setting that has changed or something. > > Any ideas what i should try or check to correct this? > > > > Dave
On my PVR150 'ivtvctl -C' shows dnr_temporal was set to 8 on each boot. By changing it to 0 the video greatly improved. 'ivtvctl -c dnr_temporal=0' Paul -- _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
