On Thu, 8 Dec 2005 05:53 pm, Mitko Haralanov wrote: > After playing with the channel setup and number, I finally have > all the channels that I can receive over the air with their correct > channel number in the database and Zap2It with the correct listings. > > However, now I am having a problem getting mythbackend to find > the channels in the database so it can get the channel options. I get > the following messages in the log: > > 2005-12-07 23:41:31.131 DVB#0 Using DVB card 0, with frontend pcHDTV HD3000 > HDTV. 2005-12-07 23:41:31.134 DVB#0 ERROR - Unable to find channel in > database. 2005-12-07 23:41:31.135 DVB#0 ERROR - Failed to get channel > options for channel . 2005-12-07 23:41:31.138 DVB#0 Recorder: Card opened > successfully (using PS mode). 2005-12-07 23:41:31.149 DVB#0 ERROR - No PIDS > set, please correct your channel setup. > > > I know that the No PIDs message means that the staring channel > is invalid. I tried setting the starting channel to 2_1 (that channel is > in the database with that channel number) but I get the same message > and when I look in the database, the startchan field of the HD3000 in > the cardinput table is empty!! > > Is the problem that mythbackend does not know how to accept > channels of the form 2_1? If that is the problem, how should the > channels be represented?
My guess is that you didn't restart 'mythbackend' after setting the 'starting channel' in 'mythtv-setup' Paul -- _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
