This is not an HD level signal. It is supposed to be a digital QAM256 signal captured by an HD3000 card from a cable feed.
I looked at (glanced at...) the xorg log. I will have to go back and take a much closer look at it. I have had the 'file handle' problem for a while, but I thought that it was due to using live-tv-'broken' SVN builds... But it may well be due to my attempting to get the HD3000 card running (using the cx88-dvb driver). I suppose that there could be an interrupt share problem. The mb is a VIA SP130000 with on-board nic and on-board video. I will have to check the BIOS. I suspect that it is not from that source, because this error only arose recently. I brought the mythbox to work and changed the display config to 1280x1024 to work with my desk LCD screen....however, I also downloaded and installed a new SVN build (8205) at that time. It was a complete reinstall, including the mysql database... I do not know enough about how X works to understand what is (not) going on. It could be that the svn build lets me get further and further into the code structure before messing up! At the moment I get the failure further 'in' than I have ever got before....... Reminds me of playing Doom or such... GI Joe dead! Play again? Geoff On Tue, 13 Dec 2005 08:51:09 -0800, Brad wrote: > >I've had similar problems. > >I'm curious if this is HD? Also- do you have any entries in your X log at >the same time? > >(I'm also just going to say I had similar 'file handle' problems because the >video card and Ethernet port were sharing the same IRQ, while this is still >the case, that problem seems to have gone away with the BIOS set to 'assign >IRQ to video'.) > >Brad > > > > > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of William >Sent: Monday, December 12, 2005 3:54 PM >To: 'Discussion about mythtv' >Subject: RE: [mythtv-users] X Bad_alloc Error > >> I'm experiencing an error which I cannot figure out. >> This is a Via SP13000 motherboard, running Fedora 4 on >> 2.6.14-1.1644_FC4 >> with mythtv svn 8205. I have xorg.conf set for 800x600 with 16 bit >> depth. These settings are down from 1280x1024x16 which was what I had >> set before things went bad. >> Note that there is not output, yet, to TV.. this is only monitor >> output. I am at a loss to understand what is causing this.. Help >> gratefully accepted... Geoff > >I cannot speak about the exact cause of your error but it sounds like a lack >of resources. Since you are running a svn version its anyones guess if you >have a problem or its the current version in svn. Probably the best thing to >do would be to fall back to the release version until you get it working and >then try upgrading. Maybe by then, the problem will be gone from svn. :) > > > R. Geoffrey Newbury [EMAIL PROTECTED] Barrister and Solicitor Telephone: 905-271-9600 Mississauga,Ontario, Canada Facsimile: 905-271-1638 _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
