On Tuesday 13 December 2005 16:12, Tom Lichti wrote: > Isaac Richards wrote: > > On Tuesday 13 December 2005 16:08, Tom Lichti wrote: > >> Kevin Kuphal wrote: > >>> Matt Mossholder wrote: > >>>> 2) Is there a way to define a single input source, but only have > >>>> certain channels from the Input Source assigned to each card? I'm in > >>>> the US, using Zap2It! as a data provider, and have a situation where > >>>> I need to use an HD3000 card to pick up the HD stations, but want to > >>>> use an analog card for everything else (freaking Comcast is > >>>> encrypting all the digital channels except ETWN and Pennsylvania > >>>> Cable TV Network). I can't define two data sources as Digital Cable > >>>> with Zap2It!, so what would be the best way to ensure I have all the > >>>> guide data? I was thinking of defining another source in the DB, and > >>>> then just copying over the HD channels from the existing source and > >>>> marking the originals as invisible.... > >>> > >>> Define your second source in zap2it with a neighboring zip code that > >>> has the same lineup if zap2it isn't letting you define two sources. > >>> Should work fine. > >> > >> I have 4 tuner cards, and they all use the same zap2it source. There is > >> nothing that says you can't use the same source twice, so I defined 4 > >> sources in Myth, with the same datadirect account info, and connected > >> them via the 4 different inputs I'm using. That might get you closer to > >> what you want. > > > > You're _supposed_ to do that, if the available channels actually match. > > > > Isaac > > Good, so I did something right for a change! He should be able to then > modify his channel listing so he only sees the available channels for > each tuner, I would assume.
Need two sources for that, as Kevin said. Isaac _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
