Hi, I am hoping someone can help me. I have written an external channel change script that does the following:
1) If the freqid passed in is less that 100 it treats it as a terrestrial channel and tries to change the channel on the device using 'v4lctl -c /dev/video0 setchannel $1' 2) Else sets channel to the channel my Sky+ RF is on and executes a channel changer command for my Sky control box. Trouble is the setchannel doesn't work - I just get a burst of white then snow! It works fine through MythTV if I remove the external channel change command (through setup). If I try and use xawtv it moans about DGA - though I did get it working with the '-remote' option but you still couldn't change channels using setchannel. I don't know what command MythTV uses to change the channel (as it works!) any ideas? - Thanks. Setup: Knoppmyth R5A22 (previous: R5A10) Pundit-r BIOS 1003 Intel Celeron D320 2.4Ghz 2x Pinnacle PCTV Stereo (saa7134) [v4l2] 256MB PC3200 RAM ATI 9100IGP using ATI 8.18.8 250 GB Samsung 8MB Cache 7200rpm SATA Sony DVD-RW Sapphire (ATI) Remote Wonder _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
