Hi, I tried ivtv v0.4.0 and v0.4.1 both have the distortion under mplayer.
This morning I dropped back to ivtv V0.3.8 and the firmware from the atrpms kits. md5sum /lib/modules/HcwMakoA.ROM /lib/modules/ivtv-fw-enc.bin aa4d1e3dd17667957d8fe5b8d2d19395 /lib/modules/HcwMakoA.ROM 6e2012d919fa48811c27e25e54a0a5dc /lib/modules/ivtv-fw-enc.bin So far no distortion, and its been running all day. And the picture is much better then 0.4.1, which had a ghost image off to the right. Maybe it could be adjusted, I did not try since the distortion was still present. I do not know if this helped the sound failure issue it is much more intermittant. It will be several weeks till I am sure that issue is gone or not. With the latest ivtv-fw-enc.bin firmware file with a md5sum of: 5f5fa240ada73c3565f5f7de4c7b5138 All three ivtv version I tried would lock up the pvr150 v0.3.8, v0.4.0 and v0.4.1. But only under mythtv, mplayer had no problems at all. A reload of the older firmware un-locked the pvr-150 so mplayer or mythtv was happy once more. I do not have a clue why mthtv would have this issue with only a firmware change. Mythtv mythtv-frontend-0.18.1-115.rhfc4.at V0.4.1 and 0.4.0 had a distortion issue under mplayer no matter what firmware file I tried. The pvr-150 is on a SBE so it took me a while to figure out the distortion was only on the SBE recordings and even longer to get it through my head that it was not just a bad cable or noise. The intermittant garbled sound was the sampling rate set too low 32000 not 48000. -- Alan Anderson [EMAIL PROTECTED] _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
