On 12/17/05, Wylie Swanson <[EMAIL PROTECTED]> wrote: > Unfortunately, cold power cycle has not seemed to do the trick. I even took > the machine out of the cabinet, removed the cards, hung out, put them back > in, and still no luck. I have the problem with two PVR-250's. The PcHDTV > 3000 and Air2PC HD-5000 still working fine, of course. :-/ > > Any suggestions? Leave power off for a day? Hrmm. Is there no known way > to do a hardware reset on the Hauppuage cards via software?
The fast way to cycle any machine is to pull the plug, andwith the plug still disconnected, cycle the power switches (the one in the back as well as the front panel switch if you have two). This will drain any residual charge held in the transformers and capacitors in the power supply. This may be an issue with your bios doing the old plug and play setup. If your bios is set to plug and play, try the opposite setting. (Note: Non PnP OS actually means that the bios will try to do the PnP setup before system boot). Not seeing a complete thread here, I have to ask if you have two cards in the same machine? If so have you tried swapping slots? -- ----------JSA--------- _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
