Can you be more specific please? /usr/share/doc/mythtv-0.18.1/contrib [EMAIL PROTECTED] contrib]$ ls 6200ch.c myth_archive_job.pl 6200ch-README mythencode.pl change-channel-lirc.pl mythlink.sh change-channel-lirc.sh mythmail dct2000serial.tar.gz mythmaillog.pl dct-channel mythname.pl etc.init.d.mythbackend.lsb mythnotify etc.rc.d.init.d.mythbackend myth.rebuilddatabase.pl etc.security.msec.perm.local README.for.mythencode.and.mythname etc.sysconfig.mythbackend temp mandrake91.etc.sysconfig.lircd trailer.pl master_iconmap.xml trailer.pl.README mkiconmap.pl trailer.pl.svnfixes mplayernetwork.pl tsc-calibrate.c
On Sun, 2005-12-18 at 15:27 -0800, Ian Forde wrote: > On Sun, 2005-12-18 at 15:45 -0700, Chris wrote: > > I've been trying for some time now to get serial channel changing > > working, hopefully someone here can provide me with some insight into > > the whole problem. > > > > I've got the following: > > 2x Motorola DCT-2224, firmware version: 7.93 > > 1x Motorola DCT-2524, firmware version: 2.54 > > > > I've tried a few different scripts to just try and change the channel > > for now, none of which seem to work. When I connect the serial port of a > > windows box to these DCTs, hitting enter results in gibberish coming > > back from the DCT, followed by the f/w version. I assume this is some > > sort of menu prompt (VxWorks?), the reason I assume this is because when > > I go through the alphabet on the 2524, different keys produce different > > outputs. Seeing as I get gibberish from all three is it safe to assume > > that their serial ports are enabled? > > > > When I run the serial cable from the FC4 box to the windows box and run > > the python scripts, I do get output over in Hyperterm, so it looks like > > I'm sending the data out. > > > > I remember reading in one of the python scripts that it wanted v2.2, but > > on my new FC4 box, I have python 2.4 installed, should this be an issue? > > Mmm... Just took a look at it - I haven't used (or even looked at) the > code in a while. Python 2.4 is definitely going to be a problem, IMHO. > I remember having issues with Python 2.3 as well... Best bet is to use > the C code in contrib/ instead... > > > I seem to be able to get everything else working except serial channel > > changing, so hopefully someone will be able to help me out. > > > > Thanks, > > -Chris > > > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
