Curtis-
How do I turn transcoding off?
-Matt
Quoting Curtis White <[EMAIL PROTECTED]>:
> Besides defining the device in your xorg.conf file, make sure you
> don't have transcoding turned on. That one got me and took me a while
> to figure out. If you have transcoding on it will not be able to play
> the files out to the PVR350 TV output because it can only decode mpeg2
> files.
>
>
> On 12/23/05, Matt Rude <[EMAIL PROTECTED]> wrote:
>>
>>
>> I have a fresh install of mythtv running on Fedora 4 with a PVR-350
>>
>> I can record shows off TV just fine and watch them on my monitor. But when I
>> try to output them to my TV throw the PVR-350 output I get no picture.
>>
>> I am un clear If I need to worry about the xorg.conf file or the
>> XF86Config-4
>>
>>
>>
>>
>> Here's my configuration
>>
>> [EMAIL PROTECTED] ~]# uname -a
>>
>> Linux mythtv 2.6.14-1.1653_FC4 #1 Tue Dec 13 21:32:09 EST 2005 i686 i686
>> i386 GNU/Linux
>>
>>
>>
>>
>> ======================================================================
>>
>>
>>
>>
>> [EMAIL PROTECTED] log]# cat /etc/X11/xorg.conf
>>
>> # Xorg configuration created by system-config-display
>>
>>
>>
>> Section "ServerLayout"
>>
>> Identifier "single head configuration"
>>
>> Screen 0 "Screen0" 0 0
>>
>> InputDevice "Mouse0" "CorePointer"
>>
>> InputDevice "Keyboard0" "CoreKeyboard"
>>
>> EndSection
>>
>>
>>
>> Section "Files"
>>
>> RgbPath "/usr/X11R6/lib/X11/rgb"
>>
>> FontPath "unix/:7100"
>>
>> EndSection
>>
>>
>>
>> Section "Module"
>>
>> Load "dbe"
>>
>> Load "extmod"
>>
>> Load "fbdevhw"
>>
>> Load "glx"
>>
>> Load "record"
>>
>> Load "freetype"
>>
>> Load "type1"
>>
>> Load "dri"
>>
>> EndSection
>>
>>
>>
>> Section "InputDevice"
>>
>> Identifier "Keyboard0"
>>
>> Driver "kbd"
>>
>> Option "XkbModel" "pc105"
>>
>> Option "XkbLayout" "us"
>>
>> EndSection
>>
>>
>>
>> Section "InputDevice"
>>
>> Identifier "Mouse0"
>>
>> Driver "mouse"
>>
>> Option "Protocol" "IMPS/2"
>>
>> Option "Device" "/dev/input/mice"
>>
>> Option "ZAxisMapping" "4 5"
>>
>> Option "Emulate3Buttons" "yes"
>>
>> EndSection
>>
>>
>>
>> Section "Monitor"
>>
>> Identifier "Monitor0"
>>
>> VendorName "Monitor Vendor"
>>
>> ModelName "LCD Panel 1280x1024"
>>
>> HorizSync 31.5 - 67.0
>>
>> VertRefresh 50.0 - 75.0
>>
>> Option "dpms"
>>
>> EndSection
>>
>>
>>
>> Section "Device"
>>
>> Identifier "Videocard0"
>>
>> Driver "nv"
>>
>> VendorName "Videocard vendor"
>>
>> BoardName "NVIDIA GeForce 4 MX (generic)"
>>
>> EndSection
>>
>>
>>
>> Section "Screen"
>>
>> Identifier "Screen0"
>>
>> Device "Videocard0"
>>
>> Monitor "Monitor0"
>>
>> DefaultDepth 16
>>
>> SubSection "Display"
>>
>> Viewport 0 0
>>
>> Depth 16
>>
>> Modes "1280x1024" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
>>
>> EndSubSection
>>
>> EndSection
>>
>>
>>
>> Section "DRI"
>>
>> Group 0
>>
>> Mode 0666
>>
>> EndSection
>>
>>
>>
>>
>> ======================================================================
>>
>>
>>
>>
>> [EMAIL PROTECTED] X11]# cat XF86Config-4
>>
>> Section "ServerLayout"
>>
>> Identifier "XFree86 Configured"
>>
>> Screen 0 "TV Screen"
>>
>> InputDevice "Mouse0" "CorePointer"
>>
>> InputDevice "Keyboard0" "CoreKeyboard"
>>
>> EndSection
>>
>>
>>
>> Section "Monitor"
>>
>> Identifier "NTSC Monitor"
>>
>> HorizSync 30-68
>>
>> VertRefresh 50-120
>>
>> Mode "720x480"
>>
>> # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz
>>
>> DotClock 34.564
>>
>> HTimings 720 752 840 928
>>
>> VTimings 480 484 488 504
>>
>> Flags "-HSync" "-VSync"
>>
>> EndMode
>>
>> EndSection
>>
>>
>>
>> Section "Device"
>>
>> Identifier "Hauppauge PVR 350 iTVC15 Framebuffer"
>>
>> Driver "fbdev"
>>
>>
>>
>> ### change fb1 to whatever number you got in the previous section
>>
>> Option "fbdev" "/dev/fb1"
>>
>>
>>
>> ### change the busid to whatever is reported by lspci. Note that
>>
>> ### output of lspci is hex, so add a preceding "0x" to the BusID
>>
>> BusID "0:0x06:0"
>>
>> EndSection
>>
>>
>>
>> Section "Screen"
>>
>> Identifier "TV Screen"
>>
>> Device "Hauppauge PVR 350 iTVC15 Framebuffer"
>>
>> Monitor "NTSC Monitor"
>>
>> DefaultDepth 24
>>
>> DefaultFbbpp 32
>>
>> Subsection "Display"
>>
>> Depth 24
>>
>> FbBpp 32
>>
>> Modes "720x480"
>>
>> EndSubsection
>>
>> EndSection
>>
>>
>>
>>
>>
>>
>>
>> Thanks
>>
>> -Matt
>> _______________________________________________
>> mythtv-users mailing list
>> [email protected]
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>
>>
> _______________________________________________
> mythtv-users mailing list
> [email protected]
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
