I have just set installed the system on AMD system using the very good set of instructions from http://wilsonet.com/mythtv/fc3myth.php to guide. The FC4 is running with kernel level 2.6.14-1.1637_FC4.
Extract from dmesg shows the card being detected Linux video capture interface: v1.00 cx2388x v4l2 driver version 0.0.5 loaded ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 CORE cx88[0]: subsystem: 17de:08a6, board: KWorld/VStream XPert DVB-T [card=14,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]: registered IR remote control cx88[0]/0: found at 0000:00:0b.0, rev: 5, irq: 11, latency: 64, mmio: 0xcd000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx2388x blackbird driver version 0.0.5 loaded ... cx88[0]: ioctl 0xc04c561a (v4l2, rw, VIDIOC_ENUMINPUT) cx88[0]: ioctl 0xc04c561a (v4l2, rw, VIDIOC_ENUMINPUT) cx88[0]: ioctl 0xc04c561a (v4l2, rw, VIDIOC_ENUMINPUT) cx88[0]: ioctl 0xc04c561a (v4l2, rw, VIDIOC_ENUMINPUT) Not sure what these messages at the end means. However when I try to run mythtvsetup it does not see it as DVB card. Could someone explain to me how I can this to work ? One other question. This system runs behind a firewall with squid as the web proxy server to the Internet. How do I configure mythtv to use the proxy server. Thanking you in advance. TSC
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
