I have changechannel and changechannel2 and in the script specify which port they control eg. /dev/ttyS0 or /dev/ttyS1. The myth tv setup program already allows for specifying a separate program to control channel changing per each tuner.
On 12/28/05, Michael T. Dean <[EMAIL PROTECTED]> wrote:
obscure information. wrote:
>
> On 12/28/05, *Michael T. Dean* < [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
>
> John P. Mitchell wrote:
>
> > obscure information. wrote:
> >
> >> will it be possible for me to add a second PVR-150 connected to an
> >> identical CFT2254 and have them change channels independently
> via lirc?
> >
> > You should be fine but you will need two SEPARATE instances of
> > lircd running. Also, my experience has shown that you do not
> want both
> > instances of lircd changing channels at the same time.
>
> Or separate "channels" for your two cable boxes. I have two DISH
> receivers and changed one to use channel 9, so I use channel 1 and
> channel 9 and a single IR blaster.
>
>I'm not sure I follow ... do you mean what channel the cable box is transmitting on?
>
>
No. I mean what channel the IR remote is transmitting on.
Mike
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
--
Joshua Frank
[EMAIL PROTECTED]
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
