I have 2 40gig(1 for xp, 1 for linux) and a SATA controller card to connect a 120 and 160gig SATA drives,  my intention is to make the SATA drives the location to dump all the recordings and it have the basic mythtv and linux on 1 of the 40 gig drives
 
Also, how do you complie drivers for a different kernel.  I am completely new to the linux world so please be patient as I try and over come the learning curve for linux(not that easy)
 
Also, when 2.6.10 hangs on loading, it mentions IRQ11 and to do a irqpoll.  Any ideas on how to send the irqpoll cmd to linux during boot?  Also, would moving the SATA card to a different PCI slot change it's IRQ and maybe satisfy any conflicts.  The problem is that under winxp, no conflicts exist with the card in any location.
 
On 12/30/05, William <[EMAIL PROTECTED]> wrote:
Ok let me throw this out there. Why not install a standard ide drive and use it to hold the os. You should be able to find a small one for next to nothing. Put all your myth stuff on the sata drives. As for the drivers you might be able to compile your own for your current kernel or you can try loading an older version that has a precompiled module.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of James Ayoub
Sent: Friday, December 30, 2005 3:49 PM
To: Discussion about mythtv
Subject: [mythtv-users] Problems installing PVR150MCE under FC2

I currently have a Wintv PVR150MCE card in my computer and part of the installation includes updating the kernel from 2.6.5 ti 2.6.10.  The problem is that I have a SATA controller card and linux will only load under 2.6.5 with it.  Under 2.6.10 or a fresh install of FC3 and FC4, the computer hangs when it trys to disable IRQ 11.  Is there a way to get ivtv drivers working without going to 2.6.10???

_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users



_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to